Mapir Survey3 Camera USB Power and FPV Cables
Use this cable to power a Survey3 camera through the USB port and view the live image from the camera from the First Person View (FPV). The cables are available in lengths of 20 or 50cm and for single or dual camera operation.
MAPIR – MAPPING THE INVISIBLE
Use this cable to power a Survey3 camera through the USB port and view the live image from the camera. The cables are available in lengths of 20 or 50cm and for single or dual camera operation.
When powering the camera with USB it is not necessary to install the camera battery, thus enabling you to reduce the overall payload weight. These cables also incorporate a single SD video out for use in a First Person View (FPV) setup or connecting to an external recorder.
Please Note: You will typically need to convert the power source to the required 5 volts of the Survey cameras in order to use this cable. This is typically accomplished with a UBEC or other voltage regulator.
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Cable Option | Single Camera 20cm, Dual Camera 20cm, Single Camera 50cm, Dual Camera 50cm |
SPECIFICATIONS
Cable Lengths | Single 20cm (STANDARD other options available) Dual 20cm (two camera version) Single 50cm (one camera version Dual 50cm (two camera version) |
USB Connection | USB B Mini Connector |
OPERATION
PIN 1 | +5V | PIN 6 | MIC Input |
PIN 2 | USB – | PIN 7 | MIC Input |
PIN 3 | USB + | PIN 8 | SD Video – |
PIN 4 | ID * | PIN 9 | SD Video + |
PIN 5 | Ground | PIN 10 | Audio + |
* Pull PIN4 Low to Ground with Resistor To Activate PIN 6-10